Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 181 / 404

7-53
Chapter 7: Layer 2/3 Ethernet Switch Firmware
NTP Settings
Clicking the NTP link brings up the NTP S
ETTINGS
page ( Figure 7-46 ), which configures
the Network Time Protocol (NTP). The parameters for this page are shown in
Table 7-34 .
Figure 7-46. NTP Settings Page
Table 7-34. NTP Settings Page Parameters
Parameter Description
NTP Client Settings
NTP Status
This field enables or disables NTP in the switch. Configure the NTP
S
ERVERS
section to enable NTP.
Receive Server Update
The value for this parameter could be Broadcast or Unicast . To process the
broadcast NTP updates from the server, choose the Broadcast option.
Timezone Settings
Hour Offset This parameter allows you to enter an hour offset from GMT for local time.
Minutes Offset
This parameter allows you to enter a minutes offset (after hour offset) from
GMT for local time.
NTP Servers
Server IP Address Use this parameter to enter the NTP server IP address.
Key
Choose the key from the configured list. These keys are configurable in
this page in the NTP S
ERVER
K
EYS
section’s fields.