![Supermicro SuperBlade SBM-GEM-X2C+ User Manual Download Page 247](http://html1.mh-extra.com/html/supermicro/superblade-sbm-gem-x2c/superblade-sbm-gem-x2c_user-manual_1404297247.webp)
7-119
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Prefix Settings
Clicking the P
REFIX
S
ETTINGS
tab brings up the P
REFIX
C
ONFIGURATION
page
(
). The parameters for this page are shown in
Preferred Time
This parameter specifies the Preferred Lifetime of the prefix address that
uses this profile.
Valid Time
This parameter indicates the Valid Lifetime of the prefix address that uses
this profile.
Valid Flag
This parameter specifies if the Valid Lifetime Flag is
Variable
or
Fixed
.
Preferred Flag
This parameter specifies if the Preferred Lifetime Flag is
Variable
or
Fixed
.
Figure 7-105. Prefix Configuration Page
Table 7-79. Prefix Configuration Page Parameters
Parameter
Description
Interface VLAN ID
This parameter specifies the index of the VLAN Interface.
Prefix
This parameter indicates the IPv6 address prefix to be advertised in RA.
Prefix Length
This parameter indicates the P
REFIX
L
ENGTH
(in bits).
Prefix Profile ID
This parameter specifies index to the IPv6 address profile table.
Table 7-78. Address Profile Settings Page Parameters (Continued)
Parameter
Description
Summary of Contents for SuperBlade SBM-GEM-X2C+
