Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 138 / 404

Superblade Network Modules User’s Manual
7-10
System Settings
The following pages can be accessed through the System Settings link:
• "System Settings" on page 7-10
• "System Version" on page 7-12
System Settings
Clicking the S
YSTEM
I
NFORMATION
tab brings up the S
YSTEM
S
ETTINGS
page ( Figure 7-8 ).
This page provides system related information and also helps you configure system
specific parameters.
Table 7-2 lists the parameters found on this page.
Figure 7-8. System Settings Page
Table 7-2. System Information Page Parameters
Parameter Description
Device Name A configurable name can be entered into this field for the switch.
IP address mode Either Manual or Automatic mode can be set for this parameter.
Subnet Mask Use this parameter to configure the subnet mask.
SNMP Engine ID This configures the SNMP Engine Identifier.
Device contact Use this parameter to change the device contact.
Device Location Use this parameter to change the device location.
PIM Mode Use this to configure the PIM status of the switch.