Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 201 / 404

7-73
Chapter 7: Layer 2/3 Ethernet Switch Firmware
In addition, the B
ASIC
S
ETTINGS
page provides the configuration3 of Bridge Mode
( Customer /Provider ) and the priority for tunneled STP BPDUs. When you configure
B
RIDGE
M
ODE TO
P
ROVIDER
, the Port Protocol based classification and MAC-based
classification on all ports must be disabled.
Port Settings
Table 7-43. VLAN Basic Settings Page Parameters
Parameter Description
Garp System Control This parameter starts or shuts down GARP in the switch.
Learning Mode
This parameter specifies the Learning Mode ( Independent, Shared, Hybrid
or VLAN Learning ).
VLAN Version This parameter specifies the VLAN version supported.
Maximum VLAN ID
This parameter specifies the largest (4094) valid VLAN ID, which this
switch can accept, above which all will be discarded.
Maximum Supported
VLANs This parameter specifies the maximum number of VLANs that this device
can scale.
Number of VLANs in the
System This parameter specifies the active number of VLANs configured in the
device.
MAC Based on All Ports This parameter enables or disables the per Port MAC based classification.
Port and Protocol Based on
all Ports This parameter enables or disables the per Port Protocol based
classification.
Figure 7-62. VLAN Port Settings Page