Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 271 / 404

7-143
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Table 7-99. Interface Settings Page Parameters
Parameter Description
VLAN/Tunnel Identifier This parameter specifies the IPv6 interface over which OSPFv3 is enabled.
Area ID This parameter specifies the area ID associated with the IPv6 interface.
Interface Type
This parameter specifies the type of OSPFv3 interface (broadcast, nbma,
pointToPoint and pointToMultipoint).
Priority This parameter specifies the priority of the interface.
Transit Delay
This parameter indicates the estimated number of seconds to transmit a
link state update packet over the interface.
Retransmission Interval
This parameter indicates the number of seconds between the link-state
advertisement retransmissions, for adjacencies belonging to the interface.
Hello Interval
This parameter indicates the length of time, in seconds, between the Hello
packets that the router sends on the interface.
Dead Interval
This parameter specifies the number of seconds for which the router waits
for hello packet from the neighbor before declaring this neighbor down.
Poll Interval
This parameter denotes the larger time interval, in seconds, between the
Hello packets sent to an inactive non-broadcast multi- access neighbor.
Demand Procedures
This parameter indicates whether Demand OSPFv3 procedures must be
performed on this interface.
Metric Value This parameter specifies the metric assigned to this interface.
Neighbour Probing
This parameter enables or disables neighbor probing to determine whether
the neighbor is active or inactive.
Neighbour Probe
Retransmit Limit
This parameter indicates the number of consecutive LSA retransmissions
before the neighbor is deemed inactive and the neighbor adjacency is
brought down.
Demand Probe Interval This parameter defines how often the neighbor is probed.