Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 110 / 404

Superblade Network Modules User’s Manual
6-14
transmitted must not be out of order. The switch performs load balancing based on a
distribution algorithm that used the following information to assign conversation to ports:
• MAC source address
• MAC destination address
• MAC source a destination address
The user can choose one of the distribution criteria from the configuration screen as
shown in
Figure 6-11 .
Configuring the Trunk
1. Click on T
RUNKING
folder on left-hand side bar to bring up the T
RUNK
S
ETTING
screen, as shown in Figure 6-11 .
2. Click on the T
RUNK ID
drop down list to select the trunk group to which you want to
add port member.
3. Click on the P
ORT
drop down list to select the port number which you want to add to
the selected trunk.
4. Click on the A
DD
button to add it in. The port number should show up under the
T
RUNK
G
ROUP
M
EMBER
in the table. Click the D
EL
button to delete a port member
from the selected trunk.
5. Select one of the distribution criteria for the load balancing algorithm.
6. Then, click A
PPLY
button to update and save to a new setting.
Figure 6-11. Trunking Screen