Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 178 / 404

Superblade Network Modules User’s Manual
7-50
QOS Policymap Settings
Clicking the P
OLICYMAP
tab brings up the QOS P
OLICYMAP
S
ETTINGS
page ( Figure 7-43 ),
which is used to specify action for a specified classmap. The parameters for this page
are shown in
Table 7-31 .
Figure 7-43. QOS Policymap Settings Page
Table 7-31. QOS Policymap Settings Page Parameters
Parameter Description
Policy Map ID
This parameter specifies the unique ID for Policymap. The value ranges
between
1 and 65535.
Class Map ID This parameter specifies the C
LASS
M
AP
ID to associate with Policymap.
Traffic Rate This parameter specifies the T
RAFFIC
R
ATE
of data that has to be applied.
In-Profile Action
This parameter specifies the action to be applied on matched data, and
can be specified as either
Policy DSCP or Policy Precedence .
Out-Profile Action
This parameter specifies the action to be applied on out-of-profile data, and
can be specified as either
Policy DSCP or Drop .
In-Profile Action Value
The I
N
-P
ROFILE
A
CTION
V
ALUE
can be specified from 0 to 7 for DSCP, or
from 0 to 63 for IP Precedence.
Out-Profile Action Value
The O
UT
-P
ROFILE
A
CTION
V
ALUE
can be specified as Drop or from 0 to 63
for DSCP.