Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 159 / 404

7-31
Chapter 7: Layer 2/3 Ethernet Switch Firmware
WEBGUI Settings
Clicking the W
EB
S
ETTINGS
link brings up the W
EB
GUI S
ETTINGS
page ( Figure 7-25 ),
which displays all basic Web GUI settings. The parameters for this page are shown in
Table 7-14 .
Figure 7-25. Web GUI Settings Page
Table 7-14. Web GUI Settings Page Parameters
Parameter Description
Session timeout
This timeout value is used to automatically logout inactive user sessions.
The default value is
5-minutes (600-seconds).
Statistics Refresh Timer
The statistics pages (grouped under "Statistics" node in left side tree) can
be set to auto refresh based on this Statistics Refresh Timer. The default
value
zero means no auto refresh by default.
Session Privilege
This displays the current privilege level of the logged in user. You can
choose to enter another privilege level using this configuration if you have
the Enable Password for the required privilege levels. The Enable
Passwords for different levels are configurable in the
Management
Security web page.