Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 139 / 404

7-11
Chapter 7: Layer 2/3 Ethernet Switch Firmware
This page also has a control to Reset To Factory Defaults . This clears all switch
configuration and local user accounts information. This reset requires reboot of the
switch.
This page also provides a control to Reboot the switch. In stacking, the Switch Identifier
is displayed on top of this reboot button. You can select the interested stack member
switch to reboot the corresponding switch. You can also select the
ALL option to reboot
all stack members.
Snoop forwarding Mode
You can use this parameter to change the Snoop Fowarding Mode
between MAC based and IP based.
Switch Start MAC address This is a display for the Switch Start MAC address.
Configuration Restore
Status
This is a display for the Configuration Restore Status
Device Up Time This is a display for the Device Up Time.
HTTP Server Status This is a display for the HTTP Server Status.
HTTP Port Number This is a display for the HTTP Port Number.
WARNING: Make sure to have all necessary configurations backed up before
doing "Reset To Factory Defaults.".
Table 7-2. System Information Page Parameters (Continued)
Parameter Description