Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 264 / 404

Superblade Network Modules User’s Manual
7-136
OSPF Neighbor
Clicking the N
EIGHBOR
tab brings up the OSPF N
EIGHBOR
C
ONFIGURATION
page
( Figure 7-121 ), which allows you to configure OSPF neighbors. The parameters for this
page are shown in Table 7-94 .
MD5 Key ID
This parameter specifies the secret key used to create the message digest
appended to the OSPF packet if the authentication type is
MD5 .
Authentication Key
This parameter specifies the key required for authentication, if
authentication is enabled on this interface.
Figure 7-121. OSPF Neighbor Configuration Page
Table 7-94. OSPF Neighbor Configuration Page Parameters
Parameter Description
Neighbor IP Address This parameter specifies the neighbor router ID.
Priority This parameter specifies a number value for the router priority.
Table 7-93. OSPF Virtual Interface Configuration Page Parameters (Continued)
Parameter Description