![Supermicro SuperBlade SBM-GEM-X2C+ User Manual Download Page 237](http://html1.mh-extra.com/html/supermicro/superblade-sbm-gem-x2c/superblade-sbm-gem-x2c_user-manual_1404297237.webp)
7-109
Chapter 7: Layer 2/3 Ethernet Switch Firmware
7-6
Layer 3 Management
The L
AYER
3 M
ANAGEMENT
home page (
) has links to all Layer 3 features.
Table 7-69. L2 Multicast Filter Configuration Page Parameters
Parameter
Description
VLAN ID
This parameter specifies the VLAN ID.
MAC Address
This parameter specifies the destination MAC address of the received
packet.
Receive Port
This parameter specifies the port on which the packet was received.
Allowed Ports
This parameter specifies the list of ports on which the received packet, with
the above set MAC address (if received from the configured port) can be
forwarded.
Forbidden Ports
This parameter specifies the list of ports on which the received packet, with
the above set MAC address (if received from the configured port) must
NOT be forwarded.
Status
You can choose to set this configuration to any one of the following types:
•
Permanent
– This configuration resides even after restart of the
switch.
•
DeleteOnReset
– This configuration deletes the entry on restart.
•
DeleteOnTimeout
– This configuration deletes the entry on expiration
of the ageing timer.
Figure 7-95. Layer3 Management Page
Summary of Contents for SuperBlade SBM-GEM-X2C+
