Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 198 / 404

Superblade Network Modules User’s Manual
7-70
Port Control
Clicking the P
ORT
C
ONTROL
tab brings up the P
ORT
C
ONTROL
page ( Figure 7-59 ), which
allows you to configure specific parameters of the port. You can choose between
Auto-negotiation and No-negotiation for a port. If No-negotiation is chosen, then the
speed of the link, FlowControl and duplex modes can be configured. The parameters for
this page are shown in
Table 7-41 .
Figure 7-59. Port Control Page
Table 7-41. Port Control Page Parameters
Parameter Description
Port This displays the port number.
Mode
This parameter allows you to select either Auto Negotiation or
No-negotiation .
Duplex This parameter allows you to select either Full Duplex or Half Duplex .
Speed
This parameter allows you to select the speed as 10 Mbps , 100 Mbps or
1 Gbps .
Flow Control Admin Status
This parmeter allows you to specify the Flow Control Admin Status as
either
Disabled , Trasmit Flow Control Enabled , Receive Flow Control
Enabled or both Transmit and Receive Flow Control Enabled .
Flow Control Operation
Status
This parameter displays the status of the flow control.
HOL Block Prevention
This parameter allows you to enable or disable Head of Line block
prevention.