Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 108 / 404

Superblade Network Modules User’s Manual
6-12
6-4 Configuring a Static VLAN
The switch currently supports static VLANs only. To configure the VLAN, click on the
VLAN folder at the left-hand side bar. The IEEE802.1Q VLAN screen should appear as
shown in
Figure 6-8 . It lists the entire current VLAN configuration and also allows a user
to create a new VLAN or modify port membership of a VLAN. The M
EMBER
P
ORTS
indicates the number of member ports of the VLAN. There are two color symbols for
each port to indicate tagging or untagging of packets egress from the port:
• Orange: Indicates a tagged egress packet
• Teal: Indicates an untagged egress packet
Creating a New VLAN
1. Click on the C
REATE
N
EW
VLAN button. The screen as shown in Figure 6-9 should
appear.
2. Assign a new VLAN ID, then click on the icon under each port to change the
member state. There are three states to choose from: untag egress packets, tag
egress packets and not member of a VLAN.
Figure 6-9. Creating a New VLAN