Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 257 / 404

7-129
Chapter 7: Layer 2/3 Ethernet Switch Firmware
RIPng
The RIP6 link allows you perform RIPv6 related configuration for the switch. This can be
accomplished through the following two pages:
• "RIP6 Interface" on page 7-129
• "Filters" on page 7-130
RIP6 Interface
Clicking the RIP6 I
NTERFACE
tab brings up the RIP6 I
NTERFACE
C
ONFIGURATION
page
( Figure 7-115 ). The parameters for this page are shown in Table 7-88 .
Figure 7-115. RIP6 Interface Configuration Page
Table 7-88. RIP6 Interface Configuration Page Parameters
Parameter Description
Interface ID Specifies the Interface Id for which RIPv6 needs to be configured.
Status This parameter specifies the administration status of the interface.
Prof ID This parameter indicates the Index of the Address Profile entry.
Metric Offset
This parameter specifies the metric for the routes that are being
re-distributed.
Def Rt Adv
This parameter indicates the default router lifetime to be placed in the
Router Advertisements sent on the interface.