Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 172 / 404

Superblade Network Modules User’s Manual
7-44
Event Configuration
Clicking the E
VENTS
tab brings up the E
VENT
C
ONFIGURATIONS
page ( Figure 7-37 ), which
configures RMON events. The parameters for this page are shown in Table 7-25 .
Figure 7-37. Event Configuration Settings Page
Table 7-25. Event Configuration Page Parameters
Parameter Description
Index This parameter specifies the index to the Events table.
Description This parameter specifies a brief description of the event.
Type
This parameter specifies the event configured. This can be a Log , an
SNMP Trap , Both , or None . For the event type to display, TRAP and Log
and TRAP Community must be configured.
Community
This parameter specifies the SNMP community string used for this trap.
This is relevant when an SNMP trap is requested for an event. For event
type to display,
TRAP and Log and TRAP Community must be configured.
Also make sure the configured community is active before adding an event
on that community.
Owner This parameter indicates the owner of this event.
Last Time Sent This parameter denotes the time this event entry last generated an event.