Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 274 / 404

Superblade Network Modules User’s Manual
7-146
Aggregation Effect
This parameter specifies the Aggreation option as one of the following:
• Advertise – When set to advertise and the associated Area ID is
0.0.0.0, then aggregated Type-5 are generated. Otherwise if
associated Area ID is x.x.x.x (other than 0.0.0.0), then aggregated
Type-7 is generated in NSSA x.x.x.x for the specified range.
• Do Not Advertise – When set to doNotAdvertise (2) and the
associated Area ID is 0.0.0.0, then Type-5 is not generated for the
specified range, while aggregated Type-7 are generated in all
attached NSSA. While associated Area ID is x.x.x.x (other than
0.0.0.0), then Type-7 are not generated in NSSA x.x.x.x for the
specified range.
• Allow All – When set to allowAll and associated Area ID is 0.0.0.0,
then aggregated Type-5 are generated for the specified range. In
addition aggregated Type-7 are generated in all attached NSSA, for
the specified range.
• Deny All – When set to denyAll neither Type-5 nor Type-7 will be
generated for the specified range.
Translation This parameter enables or disables the translation.
Table 7-101. OSPF AS External Aggregation Configuration Page Parameters
Parameter Description