Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 176 / 404

Superblade Network Modules User’s Manual
7-48
QoS
The QoS link of the System page opens the QoS Basic Settings page. This page allows
you to configure QoS through following pages:
• "QOS Basic Settings" on page 7-48
• "QOS Classmap Settings" on page 7-49
• "QOS Policymap Settings" on page 7-50
• "COSQ Scheduling Algorithm" on page 7-51
• "COSQ Weight and Bandwidth Configuration" on page 7-52
QOS Basic Settings
Clicking the B
ASIC
S
ETTINGS
tab brings up the QOS B
ASIC
S
ETTINGS
page ( Figure 7-41 ),
which allows you to configure QOS basic settings parameters. The parameters for this
page are shown in
Table 7-29 .
Buckets Granted Denotes the number of buckets granted for collecting the RMON statistics.
Status
This parameter specifies the status of the History Control entry as either
Valid or Invalid .
Figure 7-41. QOS Basic Settings Page
Table 7-28. History Control Configuration Page Parameters (Continued)
Parameter Description