Sunny Boy 700
Technical Description
SB700-11:EE
-
50
-
SMA Regelsysteme GmbH
What do you need for Powerline communication?
l
The Sunny Boy must be suitable for Powerline communication (order no.:
SWRxxxx-NE:1x0). I. e.:
−
The Powerline piggy back modem is installed (see Fig. 6.3: System control
board Sunny Boy with RS232 cabling).
−
The blue resistors under the piggy back have to be installed for Powerline
communication (see Fig. 6.3).
l
For communication with the PC
−
A socket modem SWR-COM is available.
−
Some PCs are equipped with a 25-pole COM interface. Then a small
adapter is necessary (order no. 39-5010).
−
The visualisation software Sunny Data must be installed.
How to install Powerline Communication
•
Powerline Communication with a PC
The RS232 connector from the SWR-COM is plugged into a free COM port of
the PC. The SWR-COM is plugged into the electricity socket. For details on the
visualisation software Sunny Data please see the Sunny Data manual.
•
Powerline Communication with a Sunny Boy Control
Plug the 230V power cable of the Sunny Boy Control into the electricity socket.
For operation of the Sunny Boy Control and the usage of Sunny Data Control
for Sunny Boy Control refer to the according manuals.