Disabled Passenger Lift DPT-512 | 9
SECTION 1 | GENERAL INFORMATION & OPERATING PROCEDURES
Before Operation
1. Perform a general all-around visual inspection and equipment check
of the entire unit
2. Check all markings and nameplates for legibility.
3. Perform any checks required by airport or airline regulations
4.
Always determine hydraulic oil level and fill tank to proper level
with all hydraulic cylinders fully retracted. Overfilling may occur if
cylinders are not retracted which may damage the system
5. If operating at night, check compartment lights for proper operation.
6. Check lights, horn, mirrors, wipers, safety belt, and all other safety
equipment for proper operation
During Operation
Engine and Transmission
• To operate the engine, refer to the truck operator’s manual for
recommended engine starting and operating procedures
• Failure to follow towing procedure may result in transmission
damage. Please check the manufacturer’s recommendations before
towing your unit
• These procedures are suggested general operating procedures. For
specific aircraft servicing, follow procedures specified by your airline
After Operation
• Stop engine and allow machine to come to a complete stop before
leaving the cab or allowing anyone near the unit
• Remove ignition key when parked
Service Safety
• Do not clean, adjust or service this unit while it is in motion
• Periodically check tightness of nuts and bolts, and check for loose,
worn or misaligned parts. Use only approved replacement parts.
• Any new components installed during repair must include the
current safety signs specified by Stinar.
• Perform all work in accordance with authorized standard shop
practices.
• Perform no welding, cutting, patching, and such on any load bearing
or supporting structure. If such repairs are necessary, contact the
Engineering department of Stinar before making any alterations.
•
Do not mix hydraulic oils of different specifications. Oils may not
Summary of Contents for 25781
