Still RX60 25-35, Original Instructions Manual

Page: 444 / 518

Safety regulations for maintenance
General information
DANGER
Risk of explosion!
Working on a truck within potentially ex-
plosive areas can lead to explosions in
the surrounding atmosphere.
No work must be performed on the truck
in potentially explosive areas!
–
Trucks must only be maintained and
repaired outside potentially explosive
areas.
–
Ask the safety officer to allocate a
safe working area.
All necessary safety measures must be taken
to prevent accidents during maintenance and
repair work:
–
Park the truck and switch it off.
–
Disconnect the battery male connector.
Category-2 versions of the truck have two bat-
tery male connectors (+ and -). These are se-
cured against accidental disconnection with
screws. To prevent loss of the screws, screw
the screws back in place after disconnecting
the battery male connector.
–
Ensure that the truck cannot move uninten-
tionally or start up inadvertently.
–
If necessary, have the truck jacked up by
the authorised service centre.
Components specifically for explosion protec-
tion are attached on the underside of the
truck. If these components are damaged, the
truck is no longer approved for use in poten-
tially explosive areas.
–
Have the raised fork carriage or the exten-
ded lift mast secured against accidental
lowering by the authorised service centre.
–
Observe the maximum lift height of the lift
mast and compare the dimensions listed in
the chapter entitled "Technical data" with
the dimensions of the hall in which the truck
is to be driven.
Maintenance
5
Safety regulations for maintenance
430 56378011526 EN - 03/2021 - 01