Still RX60 25-35, Original Instructions Manual

Page: 272 / 518

Load-dependant assistance systems
Overload detection (variant)
WARNING
Risk of accident as a result of exceeding the permis-
sible load capacity!
This assistance system does not replace the driver's
duty to observe the load capacity specified on the
nameplate.
–
Observe the load capacity specified on the name-
plate.
This assistance system alerts the driver as
soon as an excessive load is picked up. The
message
Overload
is shown on the dis-
play-operating unit.
The maximum load always refers to the sum
of the load picked up plus any attachments
present. The authorised service centre can
configure the setting for the maximum load.
However, the maximum load must not be
higher than the nominal load.
The overload detection restricts the hydraulic
functions as follows:
●
If the rated capacity or the maximum load
set by the authorised service centre is ex-
ceeded, the lifting speed is reduced.
●
If the rated capacity or the set maximum
load are exceeded by more than 10%, the
"Lifting" function is disabled.
NOTE
Please note the following special considera-
tions:
●
If the load pressure sensor fails, the maxi-
mum load (nominal load) is assumed. The
function engages to the maximum extent.
●
If the lifting stage switch fails, the truck con-
trol unit assumes the fork carriage is at the
maximum lift height.
●
In the case of overload, the "lifting" function
is blocked from the factory. The authorised
service centre can remove the "lifting" func-
tion block and restrict the function instead.
Operating
4
Load-dependant assistance systems
258 56378011526 EN - 03/2021 - 01