Still RX60 25-35, Original Instructions Manual

Page: 311 / 518

This menu indicates the supply flow.
The return flow is shown in a lighter colour.
●
The currently set speed of the hydraulic
pump is given in
rpm
●
The currently set supply flow rate is given in
L/min
.
NOTE
The supply flow rate depends on the speed.
The return flow automatically adjusts to the set
supply flow. When the orange activation bar
next to the "Synchronise auxiliary hy-
draulics" softkey lights up, synchronisation
takes place automatically. The return flow is
shown only dimly on the display.
To adjust the speed, push the "Plus" or
"Minus" softkey.
–
To save the setting, press the "Confirm"
softkey.
The settings are saved.
–
To cancel the setting, press the "Can-
cel" softkey.
The settings return to the most recently set
value.
Locking the flow rate
You can also lock the hydraulic oil flow rate in
full.
–
To do this, push the "Deactivate auxiliary
hydraulics" softkey .
The hydraulic oil flow rate for this hydraulic
axle is locked.
Setting the return flow rate separately
Depending on the attachment, the return flow
rate may need to be set separately.
–
To do this, push the "Synchronise auxiliary
hydraulics" softkey .
Fleet manager
Forwards
Auxiliary hydraulics 2
3 300 1/min
46,2 L/min
Backwards 3 300 1/min
46,2 L/min
6219_003-284_V2_en

Operating
4
Attachments
297 56378011526 EN - 03/2021 - 01