Still RX60 25-35, Original Instructions Manual

Page: 436 / 518

DANGER
Risk of accident from the truck crashing!
Steering movements can cause the rear of the truck
to veer off the loading bridge towards the edge. This
may cause the truck to crash.
–
Before driving across a loading bridge, ensure
that the loading bridge is properly attached and
secured.
–
Ensure that the transport vehicle onto which the
truck is to be driven has been sufficiently secured
to prevent it from shifting.
–
Maintain a safe distance from edges, loading
bridges, ramps, working platforms etc.
–
Drive slowly and carefully onto the transport vehi-
cle.
Wedging the wheels
–
Park the truck securely.
–
Secure the truck against rolling away by
placing a wedge (1) in front of each front
wheel and behind each back wheel.
CAUTION
Potential for damage to the battery male connector!
If the battery male connector is disconnected while
the key switch is on (under load), an arc will be pro-
duced. This can lead to erosion at the contacts,
which considerably shortens the service life of the
contacts.
–
Switch off the key switch before disconnecting the
battery male connector.
–
Do not disconnect the battery male connector
while the key switch is switched on, except in an
emergency.
–
Ensure that the key switch is switched off.
–
Disconnect the battery male connector.
NOTE
If the parking brake cannot be applied by
pressing the push button, refer to the section
entitled "Emergency actuation of the parking
brake" in the chapter "Procedure in emergen-
cies".
6210_001-012_V3

Operating
4
Transporting the truck
422 56378011526 EN - 03/2021 - 01