Still RX60 25-35, Original Instructions Manual

Page: 419 / 518

Replacing the battery using a truck
Preparation
WARNING
Risk of accident!
The load capacity of the truck in use must at least
match the battery weight (see the battery name-
plate).
–
Observe the nameplates of the battery and of the
change frame.
–
Before picking up the battery, the fork arms
must be adjusted to match the opening in
the chassis (A). Push the fork arms togeth-
er, selecting the maximum possible dis-
tance.
The fork arms must not be moved under the
battery any further than the length of the chas-
sis opening (B = max. 850 mm).
It is useful to mark this measurement (B)
(measured from the fork tips) on the fork arms.
Removing the battery
–
Park the truck securely and switch it off.
–
Open the battery door.
CAUTION
Possibility of damaging the battery male connectors!
If the battery male connectors are disconnected
while the key switch is switched on (under load), an
arc will be produced. This can cause the contacts to
erode, which considerably shortens the service life of
the contacts.
–
Switch off the key switch before the battery male
connectors are disconnected.
6219_003-123
A

Operating
4
Replacing and transporting the battery
405 56378011526 EN - 03/2021 - 01