Still RX60 25-35, Original Instructions Manual

Page: 242 / 518

DANGER
Risk of explosion!
Only reversible fork arms that comply
with explosion-protection regulations
may be used in potentially explosive
areas.
These fork arms are specially coated to
prevent sparks forming when coming in-
to contact with the load or floor.
–
Fit only fork arms that correspond to
explosion protection regulations.
–
Check that the cladding is complete.
–
Do not use fork arms with worn clad-
ding.
DANGER
Risk of fatal injury from falling load!
Normal fork arms are not structurally designed for re-
verse operation. Failure to observe this instruction
can lead to material failure and ultimately to the load
falling.
–
Only work in reverse operation using reversible
fork arms (1).
WARNING
Risk of accident from slipping load!
Loads may slip on the reversible fork arms if there is
no load support. A fork extension (variant) cannot be
secured against slipping.
–
Do not use a fork extension (variant).
WARNING
Risk of accident from the truck tipping over.
When driving, the centre of gravity of the load (2)
must not be more than 600 mm above the ground.
The truck may tip forwards when driving or braking.
–
Only drive with a load centre of gravity up to a
max. of 600 mm above the ground
NOTE
If the truck is equipped with the "load meas-
urement" comfort feature (variant), a "zero ad-
justment of the load measurement" must al-
ways be performed after the fork arms have
been changed. Otherwise, correct load meas-
urement cannot be guaranteed.
Operating
4
Lifting
228 56378011526 EN - 03/2021 - 01