Still RX60 25-35 Original Instructions Manual Download

Page: 173 / 518

STILL SafetyLight (variant)

WARNING

Danger of damage to eyes from looking

into the STILL SafetyLight.
Do not look into the STILL SafetyLight.

The STILL SafetyLight is a visual warning unit

designed to enable early detection of trucks in

driving areas with low visibility (such as drive

lanes, high racks), as well as at blind junc-

tions. The STILL SafetyLight is mounted on a

support on the overhead guard such that it is

not affected by jolts and vibrations.
Depending on the version, the STILL Safety-

Light projects one or more light-blue light

spots in front of or behind the truck and thus

warns others about the approaching truck.

Several light spots are projected as a chase

light. The chase light indicates the location of

the truck with its direction of travel.
Depending on the configuration of the truck,

the STILL SafetyLight automatically switches

itself on when the truck is moving. This means

that, during reverse travel (variant), for exam-

ple, it can be used as an additional light for the

working spotlight for reverse travel. The

STILL SafetyLight can also be switched on

and off on the display-operating unit.

–

To do so, push the Softkey .

NOTE

If the truck is to be operated on public roads,

the STILL SafetyLight must be switched off.



Operating

Lighting

159

56378011526 EN - 03/2021 - 01

Summary of Contents for RX60 25-35







































































































































































































































































































































































































































































































































Search results

Summary of Contents for RX60 25-35

Reviews:

Related manuals for RX60 25-35

Brands by name

Popular brands

Still RX60 25-35, Original Instructions Manual

Search results

Summary of Contents for RX60 25-35

Reviews:

Related manuals for RX60 25-35

Brands by name

Popular brands