Still RX60 25-35 Original Instructions Manual Download

Page: 355 / 518

Sun visor and sun blind

The truck can be equipped with a sun vi-

sor (2), a sun blind for the roof (1) and a sun

blind for the driver's view to the front (4).

–

To adjust the sun visor (2), grasp it and

move it to the desired position.

–

To move the sun blind (4) up and down,

grasp the tab (3) and move the sun blind.

–

If necessary, fully unroll the sun blind for the

roof (1) and attach the ends (5) in the ex-

tended position.

–

To roll up, slowly roll the blind (1) back up.



Operating

Cab

341

56378011526 EN - 03/2021 - 01

Summary of Contents for RX60 25-35







































































































































































































































































































































































































































































































































Search results

Summary of Contents for RX60 25-35

Reviews:

Related manuals for RX60 25-35

Brands by name

Popular brands

Still RX60 25-35, Original Instructions Manual

Search results

Summary of Contents for RX60 25-35

Reviews:

Related manuals for RX60 25-35

Brands by name

Popular brands