Still RX60 25-35 Original Instructions Manual Download

Page: 205 / 518

Steering

DANGER

Risk of accident!
If the hydraulics fail, there is a risk of accident as the

steering characteristics will have changed.

–

Do not operate the truck if it has a defective steer-

ing system.

–

Steer the truck by turning the steering

wheel (1) accordingly.

Turning the steering wheel to the left (L)

steers the truck to the left (L).
Turning the steering wheel to the right (R)

steers the truck to the right (R).
The arrow (2) displays the direction in which

the truck is moving.
For information on the turning radius, see the

"Technical data".

6219_003-109



Operating

Driving

191

56378011526 EN - 03/2021 - 01

Summary of Contents for RX60 25-35







































































































































































































































































































































































































































































































































Search results

Summary of Contents for RX60 25-35

Reviews:

Related manuals for RX60 25-35

Brands by name

Popular brands

Still RX60 25-35, Original Instructions Manual

Search results

Summary of Contents for RX60 25-35

Reviews:

Related manuals for RX60 25-35

Brands by name

Popular brands