Still RX60 25-35, Original Instructions Manual

Page: 337 / 518

Auxiliary equipment
General note
Depending on which zone the truck has been
modified for, the number of pieces and the ap-
pearance of auxiliary equipment will vary.
FleetManager (variant)
FleetManager is an equipment variant and can
be fitted to the truck in different versions. The
description and operation information can be
found in the separate operating instructions for
the corresponding FleetManager versions.
Shock recognition (variant)
The shock recognition is an equipment variant
of the FleetManager (variant) in which an ac-
celeration sensor is installed in the truck. The
acceleration sensor records data arising from
rapid accelerations or decelerations of the
truck, e.g. in the event of an accident. This da-
ta can be electronically read out and evalu-
ated.
–
If you have any questions, please contact
your authorised service centre.
Driver restraint systems (variants)
Different driver restraint systems are available
as variants for this truck. The description and
operation for these systems can be found in
the separate "Driver restraint systems" operat-
ing instructions.
Actuating the windscreen wipers
and windscreen washers (variant)
Pressing the softkey switches between the op-
erating stages in the sequence shown below.
Press softkey Operating stage
Off
1st time On
2nd time Interval
Operating
4
Auxiliary equipment
323 56378011526 EN - 03/2021 - 01