Still RX60 25-35 Original Instructions Manual Download

Page: 140 / 518

date, the authorised service centre must

set up a fleet manager password.

Standard fleet manager password
The standard fleet manager password is

"1111".
For safety reasons, this standard fleet

manager password must be changed af-

ter the first use. See also the section enti-

tled "Changing the fleet manager pass-

word".

Individual fleet manager password
The individual fleet manager password is

noted on the order confirmation and on

the truck invoice.

NOTE

Access to the settings menu is only available if

the truck is at a standstill and the parking

brake is applied. If the parking brake is re-

leased prematurely, the settings menu will

close.

–

Stop the truck.

–

Apply the parking brake.

–

Press the button.

–

Press the softkey.

The first menu level appears.

–

Press the

Access authorisa-

tion

softkey .

Fleet manager

Configure favourites

Truck settings

Service

Access authorisation

Display settings

6219_003-267_V2_en



Operating

Display-operating unit

126

56378011526 EN - 03/2021 - 01

Summary of Contents for RX60 25-35







































































































































































































































































































































































































































































































































Search results

Summary of Contents for RX60 25-35

Reviews:

Related manuals for RX60 25-35

Brands by name

Popular brands

Still RX60 25-35, Original Instructions Manual

Search results

Summary of Contents for RX60 25-35

Reviews:

Related manuals for RX60 25-35

Brands by name

Popular brands