Still RX60 25-35, Original Instructions Manual

Page: 333 / 518

Controlling attachments using the
Joystick 4Plus
In this version, the attachments (variant) are
controlled via the Joystick 4Plus (1) and the
slider (4). The adhesive label bearing the pic-
tograms for the hydraulic functions (2) for the
Joystick 4Plus (1) and the adhesive label (3)
for the slider (4) are affixed at the designated
points.
–
If the adhesive labels become illegible or
are not present, please contact your author-
ised service centre.
–
Observe the pictograms for the attachment
functions on the adhesive labels (2, 3).
The pictograms on the adhesive labels regard-
ing operation of the Joystick 4Plus show the
respective functions that are activated by the
individual operating devices of the Joy-
stick 4Plus.
The following applies:
–
Move the Joystick 4Plus (1) in the direction
of the arrow (A) or (B).
The attachment moves accordingly in the di-
rections (A) or (B) as shown in the pictogram.
–
Move the slider (4) in the direction of the ar-
row (C) or (D).
The attachment moves accordingly in the di-
rections (C) or (D) as shown in the pictogram.
Picto-
gram Attachment function
Move the side shift frame or fork for-
wards
Move the side shift frame or fork
backwards
Move the sideshift to the left
Move sideshift to the right
Adjust fork arms: open
Adjust fork arms: close
Release load retainer
Clamp load retainer
Open clamps
Close clamps
6219_003-206
A
D
C
B
1
4
2
3

Operating
4
Attachments
319 56378011526 EN - 03/2021 - 01