Still RX60 25-35, Original Instructions Manual

Page: 16 / 518

Your truck
Description of the truck
General
The STILL RX60 25-35 is an electrically driven
counterbalanced truck with a rear swing axle
and has a load capacity of up to 3.5 tonnes.
Alternatively, a load capacity of up to 3.0
tonnes with a load centre of gravity of 600 mm
is available. In this case, the truck can reach
driving speeds of up to 21 km/h.
The truck is suitable for indoor and outdoor
use and for use in potentially explosive areas.
The driver's compartment has an ergonomic
design with the steering column and driver's
seat offset to one side.
The "STILL Easy Control" display-operating
unit manages all functions that are not called
up by the operating devices for drive functions
and hydraulic functions. The driving condition
information and all messages are issued via a
large colour display. The display/operating unit
uses the current battery charge state and the
selected drive programme to calculate the re-
maining available time until the battery has to
be recharged and displays this information. It
also supports all FleetManager 4.x functions.
Assistance systems
The STILL RX60 25-35 can be equipped with
assistance systems that make it easier to work
with loads.
●
Mast tilt angle display
●
Automatic mast vertical positioning
●
Overload detection
●
Dynamic Load Control 1 or Dynamic Load
Control 2
●
Lift mast tilt angle display
●
Automatic mast vertical positioning
●
Fork wear protection
●
Load measurement, precise load measure-
ment, total load and tare function
Foreword
1
Your truck
2 56378011526 EN - 03/2021 - 01