Still RX60 25-35, Original Instructions Manual

Page: 157 / 518

Driver profiles
Driver profiles (variant)
This variant allows up to ten individual driver
profiles to be created. The driver is greeted
with the selected name after logging in. Once
the softkey is pressed, the main display is
shown.
If the truck is equipped with the "Access au-
thorisation with PIN code" or "FleetManager"
variants, these driver profiles can be linked to
the relevant variant.
The driver profile allows the following settings
to be saved:
●
Language
●
Favourites
●
Configuration of the status line
●
Configuration of drive programmes A and B
In addition, the operating statuses saved for
the last selected driver profile are called up
again the next time a user logs in with this
driver profile:
●
Selected drive programme 1 to 3
●
Load dynamics
●
Efficiency and drive modes
(Blue-Q/sprint mode)
If a driver without an existing driver profile logs
in using the "Access authorisation with PIN
code" or "FleetManager" variants, a driver pro-
file is generated. This driver profile corre-
sponds to the settings when the truck was de-
livered.
If the truck is not equipped with these variants,
drivers must select their profiles manually.
Any changes that drivers make to the settings
while they are logged in are saved. These will
then be available the next time that the driver
logs in.
Selecting driver profiles
If the truck is equipped with the "Access au-
thorisation with PIN code" or "FleetManager"
variants, the corresponding driver profile is ac-
tive after logging in. If the truck is not
0,0°
0,0 m
0,0 t
6219_003-291_en
Hello,
Horst

Operating
4
Driver profiles
143 56378011526 EN - 03/2021 - 01