Still RX60 25-35, Original Instructions Manual

Page: 110 / 518

WARNING
Risk of injury when jumping out of the truck!
If your clothing or jewellery (e.g. watch, ring etc.) be-
comes stuck on a component while you are jumping
into or out of the truck, this can lead to serious inju-
ries (from falling, loss of fingers etc.). It is forbidden
to jump out of the truck.
–
Do not jump out of the truck.
–
Do not wear jewellery at work.
–
Do not wear loose-fitting workwear.
CAUTION
Components may become damaged through incor-
rect use!
Truck components, such as the driver's seat, steer-
ing wheel etc., are not designed to be used for climb-
ing in and out of the truck and may be damaged due
to misuse.
–
Only use the fittings specifically designed for the
purpose of climbing into and out of the truck.
To assist with climbing into and out of the
truck, use the step (1), use the footwell (2) as
a step and use the handle (4) for support. The
post of the overhead guard (3) can also be
used for support.
Always climb into the truck facing forwards:
–
Grip the handle (4) with your left hand and
do not let go.
–
Place your left foot on the step (1).
–
Climb into the truck with your right foot and
sit down on the driver's seat (5).
–
Next, place your left foot into the foot-
well (2).
Always climb out of the truck backwards:
–
Grip the handle (4) with your left hand and
do not let go.
–
Stand up from the driver's seat (5) and
place your left foot on the step (1).
–
Climb out of the truck right foot first.
6301_003-005_V2

Operating
4
Checks and tasks before daily use
96 56378011526 EN - 03/2021 - 01