Still RX60 25-35 Original Instructions Manual Download

Page: 161 / 518

The

Driver name

menu is displayed.

–

Use the softkeys to enter the desired name.

–

To confirm, press the button.

The driver profile is active. The driver is gree-

ted with the selected name after the next log-

in.
Any changes that drivers make to the settings

while they are logged in are saved. These will

then be available the next time that the driver

logs in.

Renaming driver profiles

Driver profiles can be renamed. Drivers can

only rename their own driver profile. The fleet

manager has access authorisation to rename

all driver profiles.

Renaming by the driver

–

Apply the parking brake.

–

Press the button.

–

Press the "Settings" softkey .

–

Press the

Truck settings

softkey .

Enter driver name

= Clear

Driver name

Horst

= abc -> ABC

= Save

= Cancel

6219_003-295_en



Operating

Driver profiles

147

56378011526 EN - 03/2021 - 01

Summary of Contents for RX60 25-35







































































































































































































































































































































































































































































































































Search results

Summary of Contents for RX60 25-35

Reviews:

Related manuals for RX60 25-35

Brands by name

Popular brands

Still RX60 25-35, Original Instructions Manual

Search results

Summary of Contents for RX60 25-35

Reviews:

Related manuals for RX60 25-35

Brands by name

Popular brands