Still RX60 25-35 Original Instructions Manual Download

Page: 171 / 518

Hazard warning system

Switching the hazard warning system on and

off is different for trucks with and without the

StVZO (German Road Traffic Licensing Regu-

lations) variant.

–

To switch on the hazard warning system,

push the associated Softkey on the display-

operating unit.

All direction indicators and the turn indicator

displays on the display-operating unit flash.

–

To switch off the hazard warning system,

push the Softkey again.

All direction indicators and the turn indicator

displays on the display-operating unit stop

flashing.
Specific features of the StVZO (German

Road Traffic Licensing Regulations) variant
For the StVZO (German Road Traffic Licens-

ing Regulations) variant, the hazard warning

system cannot be switched on and off via the

display/operating unit. It is switched on and off

using the hazard warning button on the steer-

ing column. The hazard warning system in this

variant works even when the truck is switched

off.

–

To switch on the hazard warning system,

push the hazard warning button (1).



Operating

Lighting

157

56378011526 EN - 03/2021 - 01

Summary of Contents for RX60 25-35







































































































































































































































































































































































































































































































































Search results

Summary of Contents for RX60 25-35

Reviews:

Related manuals for RX60 25-35

Brands by name

Popular brands

Still RX60 25-35, Original Instructions Manual

Search results

Summary of Contents for RX60 25-35

Reviews:

Related manuals for RX60 25-35

Brands by name

Popular brands