Still RX60 25-35, Original Instructions Manual

Page: 282 / 518

–
Press the "Tare" softkey (1).
The activation bar next to the "Tare" sym-
bol lights up.
The
Lower fork slightly
prompt is
displayed.
–
Lower the fork carriage.
The value is calculated. The message
Zero-
ing ongoing
is displayed.
If the tare function was run successfully, a
weight of 0.00 t is displayed. The activation
bar next to the "tare" symbol remains lit.
–
If the tare function was not run successfully,
follow the prompts on the display and re-
peat the process.
When a load is picked up,
-.-- t
is dis-
played.
The "Precision load measurement" can be
performed.
–
To clear the tare weight, press the "tare"
softkey again.
WARNING
Risk of accident due to incorrect load specification.
If the requirements for the precision load measure-
ment function change, the tare function must be run
again, for example if a precision load measurement
needs to be performed without a crate. Otherwise,
the new precision load measurement will continue to
deduct the weight of the crate.
–
Run the tare function again without a load or a
crate.
0,0°
0,70 m
1,5
t
--,-- t
6219_003-225
1

0,0°
0,70 m
1,5
t
6219_003-223_V3_en
Lower
fork slightly

Operating
4
Load-dependant assistance systems
268 56378011526 EN - 03/2021 - 01