Still RX60 25-35, Original Instructions Manual

Page: 269 / 518

NOTE
The wizard requires access authorisation for
the fleet manager. Access to the settings
menu is only available if the truck is at a
standstill and the parking brake is applied. If
the parking brake is released prematurely, the
settings menu will close.
–
Set the load down, if necessary.
–
Drive the truck into an area that is to be
used for placing loads into stock and re-
moving loads from stock.
Once the "automatic mast vertical positioning"
assistance system has been calibrated, a pal-
let can be stored horizontally in a rack when
the truck is standing on a HGV ramp, for ex-
ample.
–
Lift the fork carriage slightly.
–
Apply the parking brake.
–
Attach a tilt angle template with a spirit level
to the outer lift mast.
–
Bring the lift mast to the vertical position ac-
cording to the spirit level.
–
Press the button.
–
Press the "Settings" Softkey .
–
Activate the "Access authorisation for the
fleet manager".
80
90
80
70
60
70
60

Operating
4
Tilt angle-dependent assistance systems
255 56378011526 EN - 03/2021 - 01