Still LTX 50 Original Instructions Manual Download Page 79

Page: 79 / 286

Capacity label for tow tractors

(LTX50, LTX-FF, LTX-T) with

front coupling

The label is only present on tractors equipped

with a front tow coupling.

NOTE

The values indicated refer to the towing limits

with the truck in

reverse travel and must not

be exceeded, otherwise the stability of the

truck and the load-bearing capacity of the

structures may be compromised.

The trailer coupled to the truck must not ex-

ceed the maximum permissible weight of

1000 kg. The maximum permissible pulling

force on the coupling during towing is 800 N.

Qmax=1000 kg F=800 N

2480



Overview

Markings

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands