Still LTX 50 Original Instructions Manual Download Page 152

Page: 152 / 286

To turn during travel:

●

When the steering wheel is turned anti-

clockwise (G) in forward travel (A), the truck

turns towards (C)

●

When the steering wheel is turned anti-

clockwise (G) in reverse travel (B), the truck

turns towards (D)

●

When the steering wheel is turned clock-

wise (H) in forward travel (A), the truck

turns towards (E)

●

When the steering wheel is turned clock-

wise (H) in reverse travel (B), the truck

turns towards (F)

WARNING

To facilitate driving, the truck automatically reduces

the speed when cornering.
Despite this automatic feature, the operator must ad-

just the cornering speed, limiting it in relation to the

load being transported and the steering angle.

Use

Driving

142

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands