Still LTX 50 Original Instructions Manual Download Page 66

Page: 66 / 286

Nominal value designation plate

DANGER

Danger! To avoid compromising the stability of the

truck, it is strictly forbidden to use batteries that

weigh less than the minimum weight (11) indicated

on the designation plate.

NOTE

●

Please indicate the serial number for all

technical enquiries.

●

The EAC mark may also be located near to

the nameplate.

●

In addition to the UKCA mark, trucks sold in

the United Kingdom will also have a label

identifying the importer.

●

On trucks sold for airports in the United

Kingdom, the designation plate will read Air-

craft ground support equipment instead of

Industrial truck.

Manufacturer

Production number

Year of manufacture

Unladen weight (without battery) in kg

Maximum battery weight in kg

Minimum battery weight in kg

Additional weight (ballast) in kg

QR code

For more detailed information, please refer

to the technical data in the operating man-

ual.

In this zone, there may be one or more

marks including: the CE mark; the UKCA

mark for the United Kingdom market; the

EAC mark for the Eurasian Economic Union

market.

Nominal power in kW

Battery voltage in V

Rated capacity in kg

Model



Overview

Markings

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands