Still LTX 50 Original Instructions Manual Download Page 166

Page: 166 / 286

Using additional fork controls (only for model LTX FF)

2419

Fork upward tilt button

Fork downward tilt button

Fork opening button

Fork closing button

"LiftRunner" trailer lifting/lowering control.

The control is optional and described in sec-

tion

NOTE

The following controls are active with the truck

switched on and the operator standing on the

platform in the correct "working position", and

only if the control has not already reached the

end position.

DANGER

Stepping onto the forks is forbidden!
Do not use the controls while standing on the forks.

Use

Moving the load

156

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands