Still LTX 50 Original Instructions Manual Download Page 200

Page: 200 / 286

General Information

To keep your forklift in good condition, carry

out the servicing indicated regularly, within the

times indicated and using the consumption

materials provided for that purpose, as speci-

fied on the following pages. Please make sure

that you keep a record of work done; this is

the only way for the guarantee to remain valid.
Maintenance is divided into:

●

Regular Service (scheduled by the user)

●

Planned maintenance (to be performed by

the service network authorised by the man-

ufacturer)

DANGER

Planned maintenance and repairs must be per-

formed by the service network authorised by the

manufacturer in order to keep the machine in per-

fect condition and compliant with technical specifi-

cations.

NOTE

Contact the authorised service network for a

maintenance contract appropriate to your fork-

lift.

CAUTION

Maintenance intervals are defined for standard use.

In the following cases, it is necessary to reduce the

interval between the various scheduled maintenance

operations: in the event of use in dusty or salty envi-

ronments, extremely high or low ambient tempera-

tures, high levels of air humidity, particularly intense

and heavy-duty uses, and specific national regula-

tions for trucks or individual components.

Operations Preliminary to Maintenance

Do the following before performing mainte-

nance operations:

●

Place the truck on a flat surface and make

sure that it cannot move accidentally.

●

Lower the forks fully.

●

Switch off the vehicle.

●

Press the emergency stop button.

DANGER

Before performing any intervention on the electric

system, disconnect the battery outlet from the rela-

tive plug.

Maintenance

General Information

190

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands