Still LTX 50, Original Instructions Manual

Page: 99 / 286

NOTE
This section describes all the optional lights
that the customer may find on the truck de-
pending on the equipment purchased.
WARNING
Some of the lights supplied are very bright and may
seem very harsh to the human eye.
To avoid being dazzled, do not look directly at the
lights, especially from a close distance.
WARNING
Risk of burns
Do not touch the headlights during or after operation.
Check that the lights function correctly. Inform
your supervisor of any faults encountered.
(1) LED light bar
●
When the push button (A) is pressed, the
LED bar turns on (the push button lights
up). When the push button (A) is pressed
again, the LED bar turns off (the push but-
ton turns off). If the truck also has dipped-
beam headlights (available only on LTX50),
the operation is slightly different, as follows:
When the push button (A) is pressed, the
LED bar turns on.
When the push button is pressed a second
time, the dipped-beam headlights also turn
on.
When the push button is pressed a third
time, both the LED bar and the dipped-
beam headlights turn off.
In addition to turning the LED bar on and off
using the push button (A), the LED bar can al-
so operate automatically, according to cus-
tomer requirements, as follows:
●
The LED bar turns on automatically with the
operator in the correct driving position on
board the truck. The LED bar turns off auto-
matically when the operator climbs off the
truck.
●
The LED bar turns on when the truck is
turned on. The LED bar turns off when the
truck is turned off.
●
The LED bar turns on only during forward
travel of the truck.
●
Additional LED-bar functions can be activa-
ted on the truck. In these cases, the LED
bar flashes to warn the operator in the fol-
lowing instances:
Warning signal upon expiry of maintenance
(contact the manufacturer's authorised
technical service centre)
Warning signal when the truck is stationary
Warning signal when the battery is low
Warning signal for alarm linked to the truck
(contact the manufacturer's authorised
technical service centre)
(2) Blue safety spotlights
The blue safety spotlights (Blue spot light) with
LED technology improve safety in the work-
place, as they allow the truck to be detected in
good time in driving zones with poor visibility
or at blind junctions. The spotlights come on
automatically when the truck is travelling for-
ward. Two types of lights are available:
●
(Safety light front) Consisting of a circular
steady light
●
(Safety light 4Plus front) Consisting of four
lights that turn on in sequence one after the
other
CAUTION
Danger of eye irritation! Risk group 2 in accordance
with standard IEC/EN 62471
Do not look directly into the blue safety spotlights
(Blue spot light)
(3) Flashing beacon
The flashing beacon improves safety in the
workplace:
●
It turns on automatically at power-up and
during use of the truck.
●
If you want to turn off the flashing beacon
when the truck is stationary, press the push
button (B). The flashing beacon will turn on
again automatically after activating truck
travel or moving the forks.
●
An additional flashing-beacon function can
be activated on the truck:
Overview
3
Options and variants
89 45878043344 EN - 11/2021 - 12