Still LTX 50 Original Instructions Manual Download Page 196

Page: 196 / 286

Charging the lead battery

CAUTION

Charge the battery with the truck turned off and the

battery hood open.
You can only remove the plug from the socket when

the truck is switched off.

DANGER

The battery must be charged in rooms that comply

with applicable regulations. Refer to the battery and

battery charger manuals to see the charging proce-

dures, level checks etc., checking the battery type

(gel, lead etc.) and making sure of the voltage and

current delivered. Excessive currents can damage

the battery and cause dangerous situations. As re-

gards safety precautions, follow the instructions

given in the battery manual and those included in

the "Safety guidelines" of this manual. Before re-

charging, the battery cables and the battery charg-

er cables must be checked for damage and re-

placed if necessary. Do not place objects on the

battery during charging.

●

Access the upper part of the battery, open

the battery hood and hold the hood open.

●

Connect the battery outlet to the battery

charger to begin charging

●

Turn on the external battery charger

●

After the battery charging operation is com-

pleted, switch off the battery charger

●

Unplug the battery charger

●

Plug the battery in again

●

Close the battery hood

NOTE

Refer to the battery operating instructions for

more information.

Use

Charging the battery

186

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands