Still LTX 50 Original Instructions Manual Download Page 188

Page: 188 / 286

To close the hood (1), follow these steps:

●

Position yourself to the side of the truck

●

Place a hand in the handle (2) or (3)

Choose the closest handle to the side of the

truck the you are on

●

Close the lock (5) by turning it towards (D)

DANGER

Risk of crushing hands! When closing the hood, in-

sert your fingers into the relative handle.
Do not keep your hands or fingers under the hood

when closing the hood.
Do not use the truck when the door of the storage

compartment is open or not closed correctly.

Use

Handling trailers

178

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands