Still LTX 50 Original Instructions Manual Download Page 132

Page: 132 / 286

Drive modes and positions

The following drive modes and positions may

be used for the truck (depending on the op-

tions chosen at the time of purchase). For

more information on use, please refer to the

specific sections that follow.
Driving with the operator on board the truck:

●

Operator standing

●

Operator seated on the seat (optional)

Driving in pedestrian mode, with the operator

on the ground alongside the truck:

●

Using the drive controls on the seat back-

rest of the truck (optional)

●

Using the drive controls on the steering

wheel (optional)

Use

Drive modes and positions

122

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands