Still LTX 50, Original Instructions Manual

Page: 75 / 286

OPX-D 20 capacity plates
DANGER
The values indicated on the capacity plate refer to
compact and homogeneous loads and must not be
exceeded — otherwise the stability of the truck and
the load-bearing capacity of the structures may be
compromised.
The capacity plates indicate the following:
●
Using the truck with a single load on the
forks (illustration 2488).
- With the straddles fully lowered and the
forks at the maximum height from the
ground (1670 mm), the maximum capacity
of the truck is 1000 kg. The height value of
1670 mm is subject to a certain tolerance
due to wear of the components and the
geometric tolerance of the individual com-
ponents of the truck.
- With the straddles raised, it is forbidden to
reach heights greater than 420 mm from the
ground with the forks. As a result, with the
straddles raised, the maximum permissible
fork height is 420 mm from the ground.
- With the forks up against the straddles,
and the straddles raised from the ground,
the maximum capacity of the truck is
2000 kg (Qmax).
●
Using the truck as a double pallet stacker
(illustration 2487).
- When transporting two loads, with one on
the forks and one on the straddles, the
maximum capacity of the truck is 2000 kg
(Qmax).
- The load placed on the forks must be light-
er than or at most equal to the loading
weight placed on the straddles (Q1≦Q2).
- The maximum load that can be transpor-
ted is 1000 kg on the forks and 1000 kg on
the straddles (Q1+Q2=2000 kg max.).
CAUTION
When used as a double pallet stacker, do not crush
the load being transported on the straddles by lower-
ing the forks.
There are no automatic safety systems.
Leave a small gap between the top part of the load
on the straddles and the bottom part of the forks.
45894390009
1000 kg
600 mm
600 mm
h=1670 mm
h ≤ 420 mm
2487
Q1+Q2max 2000 Kg Q1≤Q2
2000
kg
Q1
max 1000
kg
Q2
h=1800 mm
600 mm
600 mm

Overview
3
Markings
65 45878043344 EN - 11/2021 - 12