Still LTX 50 Original Instructions Manual Download Page 124

Page: 124 / 286

Optional driver's seat adjustments

Safety guidelines for driver's

seat adjustment work (described

in the following sections)

WARNING

Never make adjustments while driving, as this may

cause you to lose control of the truck.
Do not make adjustments when the truck is switched

on, to avoid inadvertently activating the truck con-

trols.
Make adjustments on a flat surface and only when

the truck is switched off.
After completing the adjustment, check that the com-

ponent is correctly positioned and secured.

Use

Optional driver's seat adjustments

114

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands