Still LTX 50, Original Instructions Manual

Page: 88 / 286

Backrest controls
2400
A
B
Description
Seat backrest controls, where present, vary
according to the version of truck and the op-
tions installed on the truck.
Seat backrest controls, where present, are
used to move the truck or move the forks.
The image above shows the full range of
backrest controls that the customer may find
on their truck.
NOTE
●
The image above refers to the left-hand
side of the truck. The same controls on the
left-hand side will also be present on the
right-hand side.
●
For correct use and a detailed description of
the controls, consult the following chapters
Fork controls (A)
The fork controls, where present, are installed
in the zone (A):
●
If the truck is equipped with a single central
handle, as shown in the illustration, the (A)
controls are located to the side of the han-
dle.
●
If the truck is equipped with two side han-
dles, the (A) controls are located above the
handles.
●
The fork controls vary depending on the
model of truck chosen. The fork controls
available are:
- Fork lifting and lowering for versions WITH
a lift mast.
- Fork lifting and lowering for versions
WITHOUT a lift mast.
- Fork opening and closing.
Overview
3
Instruments and controls
78 45878043344 EN - 11/2021 - 12